Welder #8 W-8 – Miller CP-250TS Welder: Miller Model CP-250TS constant-potential DC welding machine, accompanied by a Miller R-115 wire feeder and associated welding leads and accessories. This heavy-duty industrial welding setup shows normal shop wear from previous use and is being offered as a complete unit with the equipment shown.
Welder #9 W-9 – Lincoln SAE-300 Welder: Lincoln Shield-Arc Model SAE-300 industrial engine-driven welder, rated at approximately 300 amps, with adjustable welding output and electrode polarity controls. This heavy-duty unit is equipped with welding leads and is being offered with the accessories and equipment shown. Shows substantial cosmetic wear consistent with previous industrial use.
Welder #10 W-10 – Miller 500-Amp DC Constant-Potential Welding Power Source – Heavy-duty Miller industrial welding power source rated at 500 amps DC, with 220-volt, 3-phase input. The machine features a 0–500 amp DC output range and is designed for high-output wire-feed and other industrial welding applications. Includes the heavy welding leads shown with the machine. Machine is being sold as pictured; bidders should inspect the photographs and equipment prior to bidding.
Welder #11 W-11 – Airco D.C. Bumblebee 300-Amp Arc Welder – Heavy-duty Airco D.C. Bumblebee industrial arc welder with a 300-amp maximum output, 230/460-volt, 3-phase primary power, and approximately 40–300 amp welding range. The machine features adjustable direct-current output, remote amperage-control capability, and heavy welding leads included with the unit. This is a substantial industrial welding power source built for demanding shop and fabrication work and is being sold as pictured.
Welder #12 W-12 – Miller Deltaweld 450 Constant-Potential DC Arc Welding Power Source – Heavy-duty Miller Deltaweld 450 industrial welding power source rated at 450 amps, with 230/460-volt, 3-phase input and adjustable voltage output. This unit is equipped with a Miller wire-feed system, heavy-duty wire feeder, drive assembly, welding gun, and associated cables and connections, making it a complete wire-feed welding setup. The machine is mounted on a heavy-duty rolling frame and is being sold with the equipment shown in the photographs. A substantial industrial welding outfit suitable for shop, fabrication, repair, and production applications.
Scan here...
Leave us a review
Welder #13 W-13 – Airco CV-300 II Aircomatic Welding Machine – Heavy-duty Airco Model CV-300 II Aircomatic welding machine rated at 300 amps DC output with a 100% duty cycle. The nameplate shows 208/230/460-volt, 3-phase input, with adjustable voltage control and high/low voltage range. This industrial constant-voltage power source is equipped with an Airco wire-feed control and includes the heavy welding leads and components shown in the photographs. A substantial shop or fabrication welder suitable for MIG and other wire-feed welding applications. Sold as pictured.
Welder #14 W-14 – Lincoln Electric Idealarc CV-250 with LN-7 GMA Wire Feed Control – Heavy-duty Lincoln Electric Idealarc CV-250 constant-voltage welding power source, rated at 250 amps, paired with a Lincoln LN-7 GMA wire-feed control. The unit includes the heavy welding leads, wire-feed components, and associated cables shown in the photographs. The CV-250 provides adjustable welding voltage and is designed for industrial MIG and flux-cored wire-feed welding applications. A substantial, complete-looking industrial welding setup being sold as pictured.
Welder #15 W-15 – Miller SRH-333 Direct-Current Arc Welder, a heavy-duty industrial welding machine designed for demanding shop and fabrication applications. The unit is marked Model SRH-333 and is equipped with adjustable welding output, DC volt and amp meters, and substantial welding leads. The photographs show a heavy-duty electrode holder and ground lead/cable assembly with the machine. The SRH-333 is a three-phase industrial power source with approximately 300-amp welding capacity and is suitable for heavy-duty stick/arc welding applications. The machine is mounted on a heavy steel base and is being sold as pictured, including the welding leads and accessories shown. The unit has been stored and shows considerable dust, dirt, and normal industrial wear from prior use. Condition and operating status should be determined by the bidder through inspection.
Welder #16 W-16 – Lincoln Electric LN-8 wire feeder, a heavy-duty industrial wire-feeding unit intended for use with a compatible welding power source. The unit includes the LN-8 wire feeder, wire-feed controls, welding gun, extensive welding leads/cables, gas connections, and associated components shown in the photographs. The feeder has adjustable wire-speed and voltage controls and is being sold as part of the complete lot pictured. This is a wire feeder and is not a standalone welding power source. Condition is used and shows normal industrial wear, dust, and surface wear from prior use. Please inspect the photographs carefully and determine compatibility and operating condition prior to bidding.
Welder #17 Lot 17 – Lincoln Electric LN-7 GMA Wire Feeder, a heavy-duty industrial wire-feeding unit for use with a compatible welding power source. The unit is clearly identified as a Lincoln Electric LN-7 GMA Control, with adjustable wire-speed control and connections for welding cables and shielding gas. The lot includes the wire feeder, wire spool/reel assembly, welding leads/cables, welding gun, gas connection components, and other accessories shown in the photographs. This is a wire feeder only and is not a standalone welding power source. Used industrial condition with considerable dust and normal wear from prior use. Everything pictured with Lot 17 is included; bidders should inspect the photographs and verify compatibility and condition prior to bidding.
Welder #18 Lot 18 – Lincoln Electric IDEALARC CV-250 constant-voltage welding power source, a heavy-duty industrial three-phase welder rated at 250 amps DC at 70% duty cycle and 200 amps DC at 100% duty cycle. The nameplate indicates 208/230/460-volt, three-phase input and the unit features adjustable voltage control, volt/amp metering, multiple welding cable connections, and a heavy-duty wheeled base. The photographs show the CV-250 with associated welding cables/leads and connections. Used industrial condition with visible dust and normal wear from service. Sold as photographed; bidders should inspect the photographs and verify operating condition and compatibility prior to bidding.
Welder #19 Lot 19 – Miller Model CP-250TS constant-potential DC welding power source with Miller R-115, 115-volt wire feeder. The CP-250TS is a heavy-duty three-phase industrial welding power source with 208/230/460-volt input, rated at approximately 250 amps output, and adjustable open-circuit voltage in the range shown on the faceplate. The unit is equipped with a manual voltage adjustment and heavy-duty welding cable connections. Included with the lot is the Miller R-115 115V wire feeder, with adjustable wire-feed speed of approximately 75–750 inches per minute, along with the substantial welding leads and cables shown in the photographs. This is a well-used industrial welding setup showing considerable dust, wear and finish deterioration consistent with its age and service history. Sold as photographed; inspect photographs carefully and verify operating condition prior to bidding.
